Products：
Technical participation
Working voltage: 220V 50HZ
Working environment: -10 ~ 50 degrees
Temperature range: 10 ~ 99 degrees
Electric heater power: 1500 watts
Thread: 6 points thread
Length: 50cm
The main function
Power-on self-test: the controller through the power after the self-test, such as no fault display shows the ambient temperature.
Temperature setting: can set the temperature of 10 to 99 degrees
Switch function: can open and close the electric heater
Power indicator: display power on and off.
Heating indication: Indicates whether to heat
Time off
How to use: Turn on the power to start self-test, self-test after the end of the display ambient temperature.
The controller factory setting temperature of 25 degrees, the first use of the up arrow to set the temperature up to 31 degrees, when you set the temperature to automatically stop heating, lower than the set temperature automatically start heating. 3 seconds The temperature is set by default and automatically returns to the display ambient temperature.
When the temperature reaches the set temperature automatically stop heating, less than the set temperature of 2 degrees to 5 degrees automatically start heating.
installation method:
Connect the end of the heating tube with the controller port and connect it with the special terminal of the controller heating tube. The power supply wiring is connected with the power supply terminal of the controller and the leakage protection is installed.
Precautions
Do not pour water onto the controller.
Requires a professional installation, improper installation will cause the controller to not work properly.
