Infrared Thermometer LDC IR Aquarium Laser

Infrared Thermometer LDC IR Aquarium Laser

Digital Infrared Thermometer LCD IR Display -32°C ~380°C (-26 °F ~716°F) Non-Contact IR Laser Point Gun Pyrometer Digital Infrared Thermometer LCD IR Display -32°C ~380°C (-26 °F ~716°F) Non-Contact IR Laser Point Gun Pyrometer are safely and quickly used for measuring the temperature of the...

Digital Infrared Thermometer LCD IR Display -32°C ~380°C (-26 °F ~716°F) Non-Contact IR Laser Point Gun Pyrometer


product description

Digital Infrared Thermometer LCD IR Display -32°C ~380°C (-26 °F ~716°F) Non-Contact IR Laser Point Gun Pyrometer are safely and quickly used for measuring the temperature of the object's surface without contact. The most basic design consists of a lens to focus the infrared (IR) energy on to a detector, which converts the energy to an electrical signal that can be displayed in units of temperature after being compensated for ambient temperature variation.


product specification

Temperature range 

-32 °C  to 380 °C  (-26 to 716 °F )

-50C~380C(-58F~716F)

 Accuracy(In the condition  of 23°C±3°C)     -32°C (-26°F) to 0°C (32°F)
 ±3°C 0°C(32°F) to 100°C (212°F)                   
 ±2°C 100°C here in before 
 ±2°C or ±2% whichever is greater
 Repeatability  1% of reading or 0.1°C
 Response time    500 mSec, 95% response
 Spectral response      8-14 um
 Emissivity       pre-set 0.95
 Ambient operating range       0 to 40°C  (32 °Fto 104°F)
 Relative humidity      10-95% RH noncondensing,@up to 30°C (86°F)
 Storage temperature       -20 to 60°C (-4°Fto 140°F)
 Weight  130g without battery
 Dimensions   132.8*92.8*37mm
 Distance to Spot Size        12:1
 Power     2 x AAA battery (not inlcude)

Diagram and LCD display:

1

  1. Trigger: When pulling the trigger, 
    LCD display reading W/ SCAN. 
    Release the trigger, display reading
    W/ HOLD icon for 7s (approx). 
    Built-in 20s auto power off. 
 2. Laser on/off button
 3. Celsius / Fahrenheit switch button
 4. Back light on/off: When back light on,
   any operations will keep back light for 10s
 5. LCD 
 6. Battery door: When replacing batteries,
      please pull the battery door.                                                                             

2

 A data hold icon
 B scanning icon
 C laser on icon
 D back light on icon
 E battery power icon
 F measuring unit
 G measuring reading           

3

 Attention:
 Red laser point only position the general
 direction, the detection hole is the main parts measure the   
 temperature                 

 

Quick Start Instruction:
 

 Step 1  Press battery door clip, install battery correctly. Pull the trigger, LCD display reading& battery icon. Release the trigger and the reading will hold for 7 seconds.
 Step 2                                                       Locating a hot spot: To find a hot spot aim the thermometer outside the area of interest, then scan across with up and down motions until you locate the hot spot.(please turn on the laser for accurate measuring)

 

User's Guide:
 

 Instructions                                       Compact, rugged and easy to use. Just aim and push the button, read current surface temperature in less than a second.   Safely measure surface temperature of hot,hazardous or hard-to-reach objects without contact.
 How it  works                                                        temperature of an object, The optical detector sense the object s emitted energy with different wavelength. It is collected and focus onto a detector. The electronics system translated the information into a temperature  reading which is displayed on the unit.
 Cautions  Infrared thermometer should be protected from the following:
 --EMF (electro-magnetic fields) from welding equipment, inductive heaters. 
 --Thermal shock (cause by large or abrupt ambient temperature changes allow 30 minutes for unit to stabilize before use).
 -- do not  leave the unit on or near objects of high temperature.


product show


Hot Tags: Infrared Thermometer LDC IR Aquarium Laser manufacturers, suppliers, factory

Previous: Laser IR Temperature Gun Pyrometer Tester

Next: No Information