1.The low noise characteristics of the all-electric injection molding machine not only benefit the workers, but also reduce the construction cost in the soundproof production workshop.
2.To ensure the cleanliness and safety of the working environment, since the all-electric injection molding machine does not use working oil, it will not appear in the environmental pollution caused by mechanical oil leakage, and can greatly reduce the possibility of fire.
3.In general, the all-electric injection molding machine consumes only 1/3-1/4 of the total hydraulic injection molding machine. In addition, the all-electric injection molding machine does not use hydraulic oil, which eliminates the cooling step of the working oil. The use of cooling water is greatly reduced, which can greatly reduce production costs for manufacturers.
4.The high responsiveness and stability of the production action control, because the various actions of the all-electric injection molding machine production process are driven by the servo motor, the action speed is fast, the precision is high, and the hydraulic oil is not used, so that the various process parameters It is not affected by changes in oil temperature, so it has high stability during production.
5.High efficiency and application of servo motors improve the responsiveness of the system. Taking the ES series of all-electric injection molding machines as an example, the molding time is only 1/3 of that of the full hydraulic injection molding machine. Since the actuators of the electric injection molding machine are driven by independent servo motors, they are not affected by the system, so it The compounding action can be performed, for example, it can be simultaneously ejected during the mold opening process, and the mold clamping can be simultaneously performed during the plasticizing process, thereby greatly improving the productivity.
6.Water saving, because the all-electric injection molding machine does not use hydraulic oil, only the cooling water is needed at the feeding port, so the cooling water usage can be reduced by 70% compared with the hydraulic injection molding machine that loads the sensitive pump, and the ordinary quantitative pump Compared to hydraulic injection molding machines, cooling water can be reduced by 90%.
7.Optimized working environment, because the hydraulic oil is not used, the working environment can be kept clean, the noise of the machine can be more than 10dB lower than that of the full hydraulic injection molding machine. While optimizing the working environment, the injection molding machine takes up 15% of the area due to the cancellation of the hydraulic system.
Please contact us if you need: firstname.lastname@example.org