High Quality Tubular Heaters Heating Element RTV Silicone Rubber

High Quality Tubular Heaters Heating Element RTV Silicone Rubber

High Temperature Resistant RTV Silicone Rubber For Electronic Components Product Introduction: JRF-BM800 RTV silicone rubber adhesive sealant, has excellent resistance to cold-thermal changes, anti-stress properties, high low temperature resistance, at -60 ~ 200 ℃keep long-term elasticity and...

High Temperature Resistant RTV Silicone Rubber For Electronic Components

Product Introduction: 

JRF-BM800 RTV silicone rubber adhesive sealant, has excellent resistance to cold-thermal changes, anti-stress properties, high low temperature resistance, at -60 ~ 200 ℃keep long-term elasticity and stability, anti-UV, anti-aging, and has excellent insulation, moisture resistance, shock resistance ,corona resistance, anti-leakage and chemical resistance properties. in line with the EU ROHS directive.


Application :

- high frequency head, set-top boxes bonding fixed

- moisture-proof and waterproof encapsulation of sophisticated electronic components

- LED Display module and pixel waterproof encapsulation

- suitable for small or thin layer thickness (potting generally less than 6 mm) electronic components, modules, optoelectronic

display and potting protection of circuit board.


How to use :

1.cleaning : clean up the surface of an object which be potting, remove rust, dirt and grease, etc.

2.sizing : unscrew the cap , squeeze glue on the clean surface, make it a natural leveling.

3.curing : sealing parts be placed in the air, after the epidermis formation, and then from the surface to the internal curing process, within 24 hours (at room temperature and 55% relative humidity), silicone sealant will solidify 2 ~ 4mm depth, the curing depth increases gradually with the extension of time , due to deep curing , need for a long time, so suggest single component silicone sealant generally used for small electronic components and a thin layer potting, 6 mm thick sealant fully cured need more than 7 days .

Before and after curing technology parameter table


Model No.

JRF-BM800

JRF-BM800

JRF-BM800

Before Curing

Appearance

Transparency

White

Black

Viscosity(cps)

5000~30000

5000~30000

5000~30000

Relative Density(g/cm3)

1.00~1.05

1.1~1.2

1.1~1.2

Surface Dry Time(min)

1.5-5

3-15

3-15

Completely Cure Time (d)

3~7

3~7

3~7

Curing Type

Neutral

Neutral

Neutral

After Curing

Hardness (Shore A)

25±5

25±5

25±5

Tensile Strength(MPa)

≥0.6

≥0.6

≥0.6

Shear Strength(MPa)

≥0.5

≥0.5

≥0.5

Elongation(%)

100~200

100~200

100~200

Use Temperature (℃)

-60~200

-60~200

-60~200

Volume Resistivity (Ω·cm)

≥5.0×1016

≥5.0×1016

≥5.0×1016

Dielectric Strength (kV/·mm)

≥20

≥20

≥20

Dielectric Constant (1.2MHz)

2.8

2.8

2.8

Loss factor (1.2MHz)

0.001

0.001

0.001


The above performance data were at 25 ℃, relative humidity of 55% measured 7 days after curing. Our company does not

undertake relevant responsibilities for test conditions different or  product improvement of data different .


Specification :

100 ml /pc , 100pc / carton

300 ml /pc

Superb Heater Technology has been focused on the production of high quality tubular heaters heating element rtv silicone rubber since 1985, which is well-known as one of the leading manufacturers and suppliers of high quality tubular heaters heating element rtv silicone rubber. In the past years, we owned strong reputation for the high quality, reliable performance and strong durability of our products. Should you are interested, please feel free to contact our factory.

Previous: High Quality Tubular Heaters Heating Element Thread Bar Rods Pins pino

Next: High Quality 704 Air Water Tubular Heaters Hating Element Silicone Rubber