12v 24v 48v 110V 220V 380V Immersion Heater

12v 24v 48v 110V 220V 380V Immersion Heater

12v 24v 48v 3 Phase Immersion Heater Products 12v 24v 48v 3 phase immersion heater 12v 24v 48v 3 phase immersion heater are directly through a threaded opening in a tank wall or through a matching pipe coupling or half coupling. Sizes of screw plug heaters are available with 1”, 1-1/4”, 1-1/2”,...

12v 24v 48v 3 Phase Immersion Heater

Products                                                                               

12v 24v 48v 3 phase immersion heater

12v 24v 48v 3 phase immersion heater are directly through a threaded opening in a tank wall or through a matching pipe coupling or half coupling.

Sizes of screw plug heaters are available with 1”, 1-1/4”, 1-1/2”, 2”, 2-1/2" pipe threads.

A wide selection of screw plug sizes, kilowatt ratings, voltages, sheath materials, terminal enclosures and thermostats makes these compact heaters ideal for all types of applications.

Screw_Plug Tank.jpg

 

Features:

1.Easy to install, control and maintain

2.For many applications: water, oil, heat transfer fluid, and corrosive solutions, Gas, Steam

3.High power is available, various material

4.Safe and efficient


Detailed Images

 

flange heater.jpgflange heater.jpg


>>Packing and Shipping                                                          

 

Packaging for immersion heater

1)  plastic bag + carton for immersion heater

2)  wooden box for immersion heater

Shipping for immersion heater

1) shipping by express (sample order) or by sea(bulk order)

2) worldwide shipping service available



6. Power: According to the total length of the heating zone of the flow or circulating oil wire heating tube, the power is 1-2KW per meter and the maximum is 2KW.


7. Pipe diameter: 8mm-12mm


8.U-shaped tube number: G1.5: φ10*3U φ10*2U φ10*1U G2.0: φ12*3U φ12*2U φ12*1U


9. One-sided length: according to customer requirements


10. Thread thread: 1 inch 1.25 (11⁄4) inch 1.5 (11⁄2) inch, 2.0 inch, 2.5inch (21⁄2)


11. Thread thread material: stainless steel 201, stainless steel 304, stainless steel 316


12. Anti-fouling coating: liquid coating, powder coating


13. Cold insulation resistance: The cold insulation resistance should be less less than 50MΩ at the factory inspection; after the seal test, the insulation resistance after long-term storage or use should be no less than 1MΩ.


14. Cold leakage current: ≤ 0.5 mA


15. Cold insulation: 1600v. 1/seg


Immersion electric heating tube product advantage


1. Non-standard custom, flexible production, to meet the heating requirements of various equipment.



2. Corrosive liquid heating immersion electric heating tube can automatically fall off the scale accumulated on the surface of the electric heating tube when heating weak acid, weakly alkaline, or hard water.


3. Flexible threaded thread can be added.


4. Our products have obtained CE certification from the German authoritative certification body - Rheinland Institute and are exported to various countries. [1. Understand the German Rhine Institute 2. View the CE certificate and report].


5. Flow or circulating oil immersed electric heating tube closed oil tank heating flange electric heating tube can be directly fixed on the female ring gear, which is easier to install than the plane flange.


6. Under the same power and length, the flow or circulating oil immersed electric heating tube is lower than the flow or circulating oil flange electric heating tube.


We should pay attention to the following points during the use of immersed electric heating resistance tubular heater element:


1. Its heating zone must be completely immersed in the liquid, and the dry burning phenomenon will burn the immersed electric heating element;


2. The scale of the surface of the immersed electric heating tubular heater should be cleaned regularly to ensure its good service life;


3. The terminal is effectively waterproofed to avoid leakage;


4. The power design of the heating resistance tubular heater per metre of the immersed electric heating pipe shall not exceed 2KW;


Before installing the immersed electric heating resistance tubular heater, make sure that the container is placed in a stable condition before installing and fixing it. Because the container that is not placed smoothly is easy to overturn, dumping the Liquid, causing the immersed electric heating resistance tubular heater to dry, due to fire, electric shock and the like;


6. Do not install the immersed electric heating tubular heater at the air inlet with high humidity. This will easily cause the electric heating tube to be damp and the insulation will drop, which may cause dangers such as electric leakage and electric shock.


Immersion electric heating tubular heater ordering instructions


To order an immersed electric heating resistance tubular heater, please provide the following parameters:


Voltage


2. Power


Pipe diameter


4. Several U-tubes are composed


5. Unilateral length


6. Threaded flange size


7. Material (tube material, thread material)


8. Installation method


9. Liquid level situation


Previous: Stainless Steel Boiler Resistance Immersion Heater Element

Next: 110V Electric Resistance Immersion Tubular Heater