Molded Embedded Brass Heating Ring

Superb Heater Technology has been focused on the production of molded embedded brass heating ring since 1985, which is well-known as one of the leading manufacturers and suppliers of molded embedded brass heating ring. In the past years, we owned strong reputation for the high quality, reliable performance and strong durability of our products. Should you are interested, please feel free to contact our factory.

Products：

Cast copper heating ring

Show details：

product manual：

Specializing in the production of hot runner heating rings:

Cross section

   Flat type: 2.0 * 4.0 2.2 * 4.0 2.5 * 4.0 2.2 * 4.2

   Square: 3.0 * 3.0 3.3 * 3.3 3.6 * 3.6 4.0 * 4.0

   Round: double tube 1.8 double tube 2.2 single tube 3.0 single tube 3.6

2. inner diameter (heating ring hole)

  Minimum 7MM to 120MM

3. Length

   Diameter 10 or less, the length of 30 or more.

    Diameter 10-15, the length of 22 or more.

   Diameter 20 or more, according to customer requirements for goods.

4. cold end (no heat length)

  Can be customized according to customer requirements, the smallest 13MM to 300MM, the connection terminal fixed length 30MM.

5. Wire (lead)

  There are high temperature Teflon casing, mesh stainless steel casing. Normal 1 meter long line. Can be lengthened according to customer standard;

  With a temperature (5 lines) heating line: 2 for the gray, regardless of positive and negative.

                             Temperature line: red is positive, blue is negative.

                             Ground: yellow-green.

  Without temperature (3 lines) gray for heating, regardless of positive and negative. Yellow green for the ground.

6. Voltage 220V 230V 240V 380V

7. Power 100W-2000W

• Packing and shiping:

  

  
  

  

  
  

  

  OUR ADVANTAGES：

  1.Minimum order: 5pcs 

  2.Delivery time : in stock 1-2days ,out stock 3-7days

  3.More than 50  different sizes stock

  4.Provide OEM service.

  5.Quality Assurance：Under normal conditions consistent with the design range 365days

  Superb Heater Technology has been focused on the production of manifold heaters for plastic injection molding machines since 1985, which is well-known as one of the leading manufacturers and suppliers of manifold heaters for plastic injection molding machines. In the past years, we owned strong reputation for the high quality, reliable performance and strong durability of our products. Should you are interested, please feel free to contact our factory.