High Quality Heating Element Hot Runner Heater Coil Heating Element 12V 100W

High Quality Heating Element Hot Runner Heater Coil Heating Element 12V 100W

1)Cross sections optional of Enail coil heater: 4*4mm,3.5*3.5mm,3.3*3.3mm,3*3mm,4.2*2.7mm,4.2*2.5mm,4.2*2.2mm,4*2mm,∅4.5mm, ∅4.2mm, ∅4mm, ∅3.8mm,ø3.45mm, ø3.2mm, and ø3.0mm 2)The range of the length of heated length: 100mm----4000mm 3) Maximum power density: 9w/cm² Introduction of Coil Heater...

1)Cross sections optional of Enail coil heater: 4*4mm,3.5*3.5mm,3.3*3.3mm,3*3mm,4.2*2.7mm,4.2*2.5mm,4.2*2.2mm,4*2mm,∅4.5mm, ∅4.2mm, ∅4mm, ∅3.8mm,ø3.45mm, ø3.2mm, and ø3.0mm 

2)The range of the length of heated length: 100mm----4000mm 

3) Maximum power density: 9w/cm²

Introduction of Coil Heater
----------------------------------------------------------------------------------------------------------------------------------------------------

 1Sheath MaterialCr Ni-Steel
Insulation MaterialMgO
Resistance WireNi Cr 80-20
Maximum Sheath Temperature700°C
voltage800V A/C
power> 5 M W
ThermocoupleJ type (Standard) or K type
Length Tolerance (Straight)5%
Wattage Tolerance+ 10% ( + 5% Available Upon Request)
Resistance Tolerance+ 10% ( + 5% Available Upon Request)
Unheated Length35mm (Standard)
Dimensional ToleranceCoil I.D + 0.1 to 0.2mm
Coil Length + 1mm

Hot Runner Coil Heater Mold Heater is made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with MgO powder and compacted for faster and efficient heat transfer. The heaters are annealed to acquire malleability for bending into any shape. Hot runner heaters with built in thermocouple are also available. Hot runner bushes are produced with hot runner heaters of different cross section with inner brass and outer stainless steel cover.

Available om following cross section for Coil Heater:

blob

Any other cross sections can be manufactures and supplied on request.
Coil Heater for Blowing Machine


Features of Coil Heater
-------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Standard sizes available with a various cross section
2. Various Watt Density options available.
3. Robust Design with Choice of Terminal Exits
4. Available with built-in Thermocouple
5. Designed for even heat profile.
6. The precision fit on Hot Runner Nozzles & Manifolds.
7. Highly Non-corrosive.
8. Maximum heat transfer due to more contact area.
9. Advanced Thermal Engineering.

Application of Coil HeaterCoil Heater for Blowing Machine

Type of Output for Coil Heater


Coil Heater for Blowing Machine

-----Contact us-----

contact us


Hot Tags: High Quality Heating Element Hot Runner Heater Coil Heating Element 12V 100W

Previous: High Density Enai 10mm Coil Heater With XLR Plugs

Next: Flexible Stainless Steel Hot Runner Manifold Tubular Heater