Products：
product manual
The product is mainly composed of alloy heating wire and silicone rubber high temperature insulation cloth, it is fast heating, temperature uniformity, high thermal efficiency, good toughness, pressure, abrasion, and its easy to use, safe, waterproof, aging life of up to l Two years.
■ can be used to:
1, wet, no explosive gas occasions Industrial equipment pipeline, tank barrels, towers, tank heating, mixing heat and insulation, can be used when the direct winding in the heated parts of the surface,
2, refrigeration protection and air conditioning compressors, motors, submersible pumps and other equipment, auxiliary heating,
3, medical equipment, such as blood analyzer, test tube heater, health care body sculpting clothing, body sculpting slimming belt compensation heat.
■ Technical parameters
1) Insulation material maximum temperature: 250 ℃
2) the maximum operating temperature: 200 ℃
3) Insulation resistance: ≥5 MΩ
4) Compressive strength: 1500v / 5s
5) Power deviation: ± 8%
6) Withstanding voltage:> 5 KV
■ Ordering Guide:
The shape of the heating plate can be freely produced, or it can be designed according to the need.
Heating plate from the alloy resistance wire evenly distributed in the silicone rubber insulation layer, the shape can be free to set, the system can not be cut after the completion of the system.
Machinable a variety of shapes, round, triangular, led and so on.
Installation options: can be opened nail hole, double-sided tape, spring buckle, or in my factory adhesion.
Due to the installation of the heating plate, the use of the environment, the temperature control method is different, the power density will change greatly, please contact the company when consulting.
■ User needs:
Do not pull the power cord.
If you have a thermostat, please do not install it in a dripping place. Do not use thermostats and heaters separately.
This product does not have a forced shutdown function, do not use the power cord must be disconnected from the power supply.
Please do not use this product soaked in liquid, the indoor use of this product, in a dry environment, although there are electrostatic phenomena, but the function is no problem.
Do not use in an environment that can cause fire or explosion.
