Ceramic band heaters are constructed to provide high operating temperatures through a radiant heat process. These heaters are designed to withstand operating temperatures up to 1400°F for heating cylindrical objects. Ceramic band heaters have a layer of built-in insulation that reduces power consumption and lowers utility costs. Various termination exits and constructions allow for custom designs and maximum performance.
1. 1- or 2-piece construction
2. Partial coverage
3. Exterior cover: 24 gauge 3042b stainless steel
4. A shroud of 26 gauge 3042b stainless steel is placed on inside for protection
5. Minimum standard diameter: 2″ (consult factory for smaller diameter)
6. Minimum standard width: 1″ (consult factory for smaller width)
7. Thickness: 0.5″
8. Regular gap: 0.375″
1. Post terminal
2. Fiber glass sleeve
3. Metal braid (SS)
4. Armour cable (AC)
5. Teflon leads
6. Silicone wire
7. Ground post
8. Dual voltage
9. Low profile cap
10. 3 Phase
1. Terminal box
2. Terminal block with ceramic block
3. European plug
4. European plug with terminal box
5. Ceramic post covers
1. Built-in barrel nut construction
2. Spring-loaded barrel nuts
3. Latch and trunion
4. Flange lock-up
1. Mounting holes
3. Square cut-out
4. Adaptors and fittings
Introduction to ceramic band heater
The ceramic band heater is a high-efficiency heat-dividing heater that ensures uniform temperature on the hot surface and eliminates hot spots and cold spots in the equipment. It has the advantages of long life, good thermal insulation performance, strong mechanical properties, corrosion resistance and magnetic field resistance. The external heat dissipating surface is added to the heat insulating device, and the inner heat dissipating surface is sintered with infrared rays, thereby saving 30% of electricity consumption.
Ceramic band heater performance
1. Fast heat transfer, uniform heat generation and stable operation.
2. The temperature is not leaked, which can save electricity and work safely.
3. The power of the product is high, and the power of the ceramic strip is 0.5~1.5 times higher than that of the ordinary one.
Ceramic band heater range
Extruder, pipe machine, profile machine, sheet machine, film blowing machine, wire drawing machine, granulator, pelletizer, compression molding machine and other plastic machinery equipment barrel heating.