Product Details
Air cooled band heaters are designed for high temperature heating and cooling extrusion processes. Forced air blowers are used for cooling. The ambient airflow enters the shroud, circulates around the band heater and barrel, removes the heat from the heater and exits the shroud opposite the entrance port.
Plastic extruders
To heat and cool the barrel
Low maintenance
Long service life
Flexible, easy to install
Non-thermal insulated
Maximized cooling efficiency
Specific surface load up to 8 W/cm²
Working temperature up to 500°C
External stainless steel sheet, resistant to high temperatures
Nickel-Chrome 80/20 resistance coil
Forced air blowers are available in sizes and ratings
Diameter and Width.
Voltage and Wattage.
Wiring method and position.
The position and size of the thermocouple holes if required.
Whether need air blowers or not
Introduction to ceramic band heater
The ceramic band heater is a high-efficiency heat-dividing heater that ensures uniform temperature on the hot surface and eliminates hot spots and cold spots in the equipment. It has the advantages of long life, good thermal insulation performance, strong mechanical properties, corrosion The external heat dissipating surface is added to the heat insulating device, and the inner heat dissipating surface is sintered with infrared rays, which is 30% of electricity consumption.
Ceramic band heater performance
1. Fast heat transfer, uniform heat generation and stable operation.
2. The temperature is not leaked, which can save electricity and work safely.
3. The power of the product is high, and the power of the ceramic strip is 0.5~1.5 times higher than that of the ordinary one.
Ceramic band heater range
Extruder, pipe machine, profile machine, sheet machine, film blowing machine, wire drawing machine, granulator, pelletizer, compression molding machine and other plastic machinery equipment barrel heating.
