Tubular Electric Heating Element Cartridge Heater Made Customized

Tubular Electric Heating Element Cartridge Heater Made Customized

Products: Product Description 1.Introduction of Cartridge Heater Element Cartridge Heating Element is a piece of equipment made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr20/80). It is used to heat in plastic injection moulds, dies, platens and so forth. 2.Recommended for...

Products:

104-2.jpg

104-3.jpg

104-4.jpg

104-1.jpg

104-5.jpg


Product Description

 

1.Introduction of Cartridge Heater Element

 

Cartridge Heating Element is a piece of equipment made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr20/80). It is used to heat in plastic injection moulds, dies, platens and so forth. 

 

 

 

2.Recommended for temperatures up to 750°C

 


All high temperature resistance cartridge heater are available with a built in Thermocouple Type J or K

 

 

 

Sheath Material

SUS 304/316/ Incoloy 840

Spirals

Nickel - Chrome

Insulation

Magnesium Oxide Powder

Voltage Supply

12V to a maximum of 480V

Maximum Temperature

750 °C

Resistance Tolerance

+10% - 5%

Wattage Tolerance

+5% - 10% (closer tolerances are available upon special request)

 

 

3.Specification Requirements For Ordering

 

There are many leads options available, including Glass Fibre Leads, Silicon Rubber Leads, PTFE Leads, Ceramic Beaded Leads, Braided Leads and Conduits. Please advise us of the type of leads preferred. If you would like some assistance or advise on the correct lead to use, please do not hesitate to ask.

 

4.When Ordering high temperature resistance cartridge heater , please specify the following information :

 

1.Type of Cartridge Heater ( please refer to Termination Options ).

 

2.Tube diameter of cartridge heater.

 

3.Overlength of catridge heater.

  

4.Wattage & Voltage

 

5.Lead type ( glass fibre / PTFE ) & lead length.

 

5.Options uses for high temperature resistance cartridge heater .

 

 

 

1.Plastic Processing
2.Packaging Machinery
3.Injection and Blowing Moulding
4.Extruders
5.Foundries
6.For Fastening of turbine bolts
7.Soldering pots

  • Connecting wires::

    a. glass fiber insulation nickel wire (temperature 450 degrees -750 degrees)

    b. Crimp Teflon line (temperature 250 degrees)

    c. Crimp silicon insulated wire (temperature 200 degrees)

    d. Crimp fiberglass insulated nickel wire (temperature 450 degrees)

    Please note that our manufacture to customer specification. There are many lead options available, including Glass Fibre Leads, Silicon Rubber Leads, PTFE Leads, Ceramic Beaded Leads, Braided Leads and Conduits. Please advise us of the type of leads preferred. If you would like some assistance or advise on the correct lead to use, please do not hesitate to ask.

    When ordering Cartridge Heaters, please specify the following information :-

    1.Type of Cartridge Heater ( please refer to Termination Options ).

    2.Ø of Cartridge Heater.

    3.Overall length for a straight Cartridge Heaters.

    4.Wattage & Voltage

    5.Lead type ( glass fibre / PTFE ) & lead length.


    Element component

        1. China and Europe High-grade nickel chromium resistance wire,

        2.Japan and USA  MgO core,

        3. Seamless Stainless steel tube

        4 Built in cable, or swaged in

    • Special sizes, wattages, and materials are available upon request; 

    • Custom-designed to meet your specifications.

    • Pin leads are available


    Why choose us:

    High-quality materials

    Insulation: UCM(UK)  Magnesium Oxide Powder ;KANTHAL ,BJH resistance wires ,SS321Seamless Stainless steel tube;OTC(USA) Tateho (Japan) mgo rod...


    Advanced production and testing equipment


    Work shop and stock


    Our certificate


     

     


    Packing and shipment:

    OUR ADVANTAGES:

    1.Minimum order: 3pcs 

    2.Delivery time : in stock 1-2days ,out stock 3-7days

    3.More than 100  different sizes stock

    4.Products are divided into two grades

    A grades:use the The world's top material Best quality,Meet or exceed the same quality in Europe and America,Only 40% of the price of similar products in Europe and America To meet customer demand for high quality.

    B  grades:use the The china top material,Best quality in china ,Meet the standard for quality and price requirements of customers

    5.Provide OEM service.

    6.Quality Assurance:Under normal conditions consistent with the design range ,

    A grades 365days

    B grades 180days

    Superb Heater Technology has been focused on the production of stainless steel diameater 6mm cartridge heaters injection molding machine heaters since 1985, which is well-known as one of the leading manufacturers and suppliers of stainless steel diameater 6mm cartridge heaters injection molding machine heaters. In the past years, we owned strong reputation for the high quality, reliable performance and strong durability of our products. Should you are interested, please feel free to contact our factory.


Superb Heater Technology has been focused on the production of tubular electric heating element cartridge heater made customized since 1985, which is well-known as one of the leading manufacturers and suppliers of tubular electric heating element cartridge heater made customized. In the past years, we owned strong reputation for the high quality, reliable performance and strong durability of our products. Should you are interested, please feel free to contact our factory.
Hot Tags: tubular electric heating element cartridge heater made customized manufacturers, suppliers, factory

Previous: Right Angle 3d Printer Cartridge Heater With Stainless Steel

Next: Single - Ended Stainless Steel Single - Head Heating Rod Non - Standard Custom