Products：
1.Introduction of Cartridge Heater Element
Cartridge Heating Element is a piece of equipment made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr20/80). It is used to heat in plastic injection moulds, dies, platens and so forth.
2.Recommended for temperatures up to 750°C
All high temperature resistance cartridge heater are available with a built in Thermocouple Type J or K
Sheath Material | SUS 304/316/ Incoloy 840 |
Spirals | Nickel - Chrome |
Insulation | Magnesium Oxide Powder |
Voltage Supply | 12V to a maximum of 480V |
Maximum Temperature | 750 °C |
Resistance Tolerance | +10% - 5% |
Wattage Tolerance | +5% - 10% (closer tolerances are available upon special request) |
3.Specification Requirements For Ordering
There are many leads options available, including Glass Fibre Leads, Silicon Rubber Leads, PTFE Leads, Ceramic Beaded Leads, Braided Leads and Conduits. Please advise us of the type of leads preferred. If you would like some assistance or advise on the correct lead to use, please do not hesitate to ask.
4.When Ordering high temperature resistance cartridge heater , please specify the following information :
1.Type of Cartridge Heater ( please refer to Termination Options ).
2.Tube diameter of cartridge heater.
3.Overlength of catridge heater.
4.Wattage & Voltage
5.Lead type ( glass fibre / PTFE ) & lead length.
5.Options uses for high temperature resistance cartridge heater .
1.Plastic Processing
2.Packaging Machinery
3.Injection and Blowing Moulding
4.Extruders
5.Foundries
6.For Fastening of turbine bolts
7.Soldering pots
Advanced production and testing equipment
Work shop and stock
Our certificate
Packing and shipment:
OUR ADVANTAGES：
1.Minimum order: 3pcs
2.Delivery time : in stock 1-2days ,out stock 3-7days
3.More than 100 different sizes stock
4.Products are divided into two grades
A grades：use the The world's top material Best quality，Meet or exceed the same quality in Europe and America，Only 40% of the price of similar products in Europe and America To meet customer demand for high quality.
B grades：use the The china top material，Best quality in china ，Meet the standard for quality and price requirements of customers
5.Provide OEM service.
6.Quality Assurance：Under normal conditions consistent with the design range ，
A grades 365days
B grades 180days
Superb Heater Technology has been focused on the production of stainless steel diameater 6mm cartridge heaters injection molding machine heaters since 1985, which is well-known as one of the leading manufacturers and suppliers of stainless steel diameater 6mm cartridge heaters injection molding machine heaters. In the past years, we owned strong reputation for the high quality, reliable performance and strong durability of our products. Should you are interested, please feel free to contact our factory.
