
Electric heater cartridge is a piece of equipment, made of MgO powder or MgO tube, ceramic cap, resistance wire(NiCr2080),High temperature leads, seamless stainless steel sheath(304,321,316,800,840). usually in tube form,
that is used in heating applications by way of insertion into metal blocks via a series of drilled holes. Cartridge heaters are manufactured in two basic forms - high density and low density.
High density cartridge heaters are used to heat plastic injection moulds, dies, platens and so forth, whereas low density cartridge heaters are more suitable for packing machinery, heat sealing, labelling machines and hot stamping applications.
Application Manufacturer Factory Directly 12V/24V 40W Cartridge Heater insertion heater
Injection moulding - Internal heating of nozzles
Hot runner systems - Heating of manifolds
Packaging industry - Heating of cutting bars
Packaging industry - Heating of hot stamps
Laboratories - Heating of analytical equipment
Medical: Dialysis, Sterilization, Blood Analyzer, Nebulizer, Blood/Fluid Warmer, Temperature Therapy
Telecommunications: Deicing, Enclosure Heater
Transportation: Oil/Block Heater, Aircraft Coffee Pot Heaters,
Food Service: Steamers, Dish Washers,
Industrial: Packaging Equipment, Hole Punches, Hot Stamp.
Technical data Manufacturer Factory Directly 12V/24V 40W Cartridge Heater insertion heaterHeater
Industrial heater | Immersion cartridge water heater with thermocouple |
Resistance heating wire | NiCr 80/20 wire |
Sheath | stainless steel 304,321,316, Incoloy 800, Incoloy 840 |
Maximum temperature | 800 degree Celsius |
Wattage Tolerance | +5%, -10% |
Resistance tolerance | +10%, -5% |
Voltages available | 380V,240V, 220V,110V,36V,24V or 12V |
Length tolerance | ±1 mm |
Diameter tolerance | -0.02mm |
Standard Cold Zone | 5-10mm |
Delivery time | 7-10 working days |
Insulation resistance (cold) | ≥ 500 MΩ |
Maximum leakage current (cold) | ≤ 0.5 mA |
Thermocouple Location | type J |
type K
| |
Contact us